PC settings, IP address | Furuno FAX-30 manual

7. INSTALLATION

7.5.2PC settings

The PC communicates with the FAX-30 via Internet protocol TCP/IP. Therefore, set IP address on the PC as below.

1.Start up the PC and open the Control Panel folder.

2.Open the Network and Dial-up Connections folder.

3.Double-click Local Area Connection.

4.Click Properties.

5.Check Internet Protocol (TCP/IP).

6.Click Properties.

7.Choose “Use the following IP address.”

8.Set the IP address for 172.31.100.100.

9.Set the Subnet mask for 255.255.0.0.

FACSIMILE RECEIVER
		FAX-30
IP Address: 172.31.8.1									Subnet Mask: 255.255.0.0
IP Address: 172.31.8.1
										PC
										PC
									HUB*	IP Address:
										172.31.100.100
										PC
										IP Address:
		* = HUB is not required to connect single PC.								172.31.100.101

IP address

10.Click OK.

11.Click OK.

12.Click Close button.

13.Turn the PC off and on again.

14.Start up the browser.

15.Enter the FAX-30’s URL: http://172.31.8.1 and press the [Enter] key.

The facsimile receiver top display should appear. If it does not appear, recheck above settings.

FACSIMILE RECEIVER

FAX-30

WX FAX

NAVTEX

LOGOUT

Facsimile receiver top display

7-8

Image 90

Furuno FAX-30 manual PC settings, IP address

Contents

Facsimile Receiver First E D I T I O N Safety Instructions Safety Instructions for the Installer Table of Contents Navtex Operation Navnet Appendix Features ForewordWord to the Owner of the FAX-30 General Operational CharacteristicsVii NavNet Viii System Configuration Network installationNetwork installation PC installation Facsimile Receiver Equipment Lists Standard supplyName Type Code No Qty Remarks Optional supply XiiName Type Code No Remarks Controls OVERVIEW, SetupOverview, Setup NavNet Controls Preparations for using the FAX-30 Select sentence window Accessing the FAX mode FAX-30, top viewDisplay selection window RX mode options Choosing the receive modeReceive mode setup screen Standby display Receive notification RX notice options Overview, Setup PC Accessing the FAX-30 top displayFacsimile receiver top display Standby displays RX Mode Logging out Choosing channel FAX Operation NavnetAutomatic Receiving Thumbnails of received images Fax channel setup window Zone optionsStation options Example stations of northwest pacific Channel options Example JMH/Tokyo Frequency entry window Previewing image being received Stopping automatic receivingFacsimile receiving display Manually Starting, Stopping Receiving Manually starting receivingStart RX options Wrong speed 60 chosen instead Wrong Speed or IOC and ImageManually stopping receiving Wrong speed 120 chosen instead Timer setup screen Timer ReceivingSetting timer receiving schedule Timer schedule list Timer schedule menu Station options Example N Pacific W Part Drum speed options Channel options Example station JMHIOC options Start time entry window Start timer options End time entry windowSave window Turning on/off specific timer programs Clearing all timer programsClear all options Displaying Facsimile Images Facsimile image Phase entry window Phase mismatchExample of phase mismatching Processing Facsimile Images Noise rejection Phasing signal out of synchronizationExample of phasing signal out of synchronization Sync entry window Color options Image colorImage format Reverse image options Rotating images Erasing Facsimile ImagesZooming images Erase image options Preventing Erasure of Facsimile Images Adding Facsimile Channels FAX-30 top 2. Press the Edit WX FAX Station soft keyEdit facsimile station menu Station options Example stations of northwest pacific Frequency, call sign and station name entry windows Starting receiving Channel setup menuFAX Operation PC Stopping receiving Setting, changing timer receiving schedule Timer program list Timer Program No.2 Timer program menu Turning on/off specific timer programs Facsimile standby display Top Phase Example of phasing signal out of synchronizatio Sync options Color Saving images Lock Lock options Edit Station List Edit station list menu This page intentionally left blank Message categories Navtex Operation NavnetAbout Navtex Messages Receiving navtex messages Navtex message data display Setting Up Navtex Stations, Messages, AlarmsRX setup menu Navtex frequency options Navtex station mode options Navtex station optionsNavtex message options Max error rate entry window Alarm SAR MSG optionsAlarm warning msg options Previewing Incoming Navtex Messages Navtex message selection screenNavtex message preview display Displaying Navtex Messages Displaying navtex messagesSample navtex message Remarks on navtex messages Displaying the Navtex Station List Nav areas for 490 kHz navtex stationsKHz stations of nav area Edit navtex station menu Adding Navtex StationsEdit station menu Nav area selection window Station name entry window Station ID1 entry windowLatitude entry window Navtex Operation PC Setting Up Navtex Stations, Messages RX Setup Navtex standby display Received messages click to display 490kHz Station List Navtex station list Edit station list Editing Navtex Stations Cullercoats Deleting Navtex Stations This page intentionally left blank Maintenance points MAINTENANCE, TroubleshootingMaintenance Check Point Action Troubleshooting Replacement of FuseTroubleshooting Trouble Problem Remedy Diagnostics NavNet System setup menuFAX-30 menu Diagnostics PC Diagnostic test results Clearing Data NavNet Clear memory menuClear all images options Clearing Data PC Clear memory options All Clear for technicians only FAX-30, cover opened Simulation Mode Accessing the simulation mode through NavNetSimulation setup menu Accessing the simulation mode through PC SIMULATION§ Setup WX FAX §SIMULATION Live Navtex Simulation This page intentionally left blank Installation Mounting dimensions of facsimile receiver FAX-30Facsimile Receiver Antenna Unit Wire antenna or whip antennaAntenna wiring and preamp status General antenna connection Installation of preamp unit FAX-5 option How to mount the preamp unit FAX-5 Wiring Wiring Wire or whip antenna Power cableGround wire Attachment of antenna connector Supplying Power to the Preamp Unit JIS cable specificationsFAX-30, top view, cover removed Internet Explorer Version Browser, PC SettingsBrowser settings Netscape Navigator Version PC settings FAX-30IP address Facsimile station map AppendixFacsimile Stations AP-1 AP-2 Zone AP-3 Facsimile station list alphabetical order AP-4 Navtex StationsNavtex stations map Location of navtex stations Navtex stations list AP-5 AP-6 AP-7 VII AP-8 XII AP-9 Menu TreeNavNet menu tree Soft keys AP-10 Menu key PC Menu tree AP-11Facsimile menu tree AP-12 Navtex menu tree Specifications of Facsimile Receiver This page is intentionally left blank ＰａｃｋｉｎｇＬｉｓｔ FAX-30-J/E-AP FAX-30-J/E-N Page Page Page Page Page Index IN-1 IN-2 Index