Operational Characteristics, Vii, General, NavNet | Furuno FAX-30

Operational Characteristics

General

•The equipment receives one facsimile image or naxtex message at a time. Thus, a navtex message cannot be received when a facsimile image is being received and vice versa, regardless of navtex message category.

•Three receiving modes are available, facsimile, navtex, and facsimile(timer) & navtex. When using the facsimile(timer) and navtex, the order of priority is

Facsimile(timer) (highest priority) → Navtex (lowest priority)

•The FAX-30 does not have an internal clock, so time is input from the NavNet display or the PC. (For PC-only configuration, time data is read when the browser accesses the FAX-30. Therefore, turn on the FAX-30 before accessing it from the PC to allow for input of time data, which is necessary for facsimile timer recording.) To receive time data, do the following:

NavNet: Output the date and time data sentence ZDA through the NavNet network.

PC: Set the PC’s clock to the correct time.

•If both a NavNet series unit and a PC are used, it is recommended to operate the FAX-30 from the PC because of the two different communication protocols. (Use the NavNet series unit to feed navigation data to the PC.)

•Navigation data must be fed through the network to use the automatic navtex mode. Therefore, this mode is not available in the PC-only configuration.

NavNet

•The FAX-30 cannot be accessed from the NavNet for 15 seconds after the FAX-30 has been turned on.

•NavNet requirements:

Navionics: Ver. 15, Boot Ver. 2 (1950006002)

C-MAP: Ver. 11, Boot Ver. 2 (1950006002)

PC

•The FAX-30 cannot be accessed from the PC while the FAX-30 is loading data at start up. Wait until the POWER LED flashing interval changes from 0.4 to two seconds before accessing the FAX-30.

•Most operating procedures in this manual are written for use with the Internet Explorer. Menu items, control button names, etc. may be different on the Netscape Navigator.

•PC requirements:

OS:	Windows 98, 2000, XP
Memory:	Min.128 MB
CPU:	Min. 600 MHz
Resolution:	1024x768 pixels

vii

Image 9

Furuno FAX-30 manual Operational Characteristics, Vii, General, NavNet

Contents

Facsimile Receiver First E D I T I O N Safety Instructions Safety Instructions for the Installer Table of Contents Navtex Operation Navnet Appendix Features ForewordWord to the Owner of the FAX-30 Vii Operational CharacteristicsGeneral NavNet Viii System Configuration Network installationNetwork installation Facsimile Receiver PC installation Equipment Lists Standard supplyName Type Code No Qty Remarks Optional supply XiiName Type Code No Remarks Overview, Setup NavNet OVERVIEW, SetupControls Controls Select sentence window Preparations for using the FAX-30 Accessing the FAX mode FAX-30, top viewDisplay selection window Receive mode setup screen Choosing the receive modeRX mode options Standby display RX notice options Receive notification Overview, Setup PC Accessing the FAX-30 top displayFacsimile receiver top display Standby displays Logging out RX Mode Automatic Receiving FAX Operation NavnetChoosing channel Thumbnails of received images Fax channel setup window Zone optionsStation options Example stations of northwest pacific Frequency entry window Channel options Example JMH/Tokyo Previewing image being received Stopping automatic receivingFacsimile receiving display Manually Starting, Stopping Receiving Manually starting receivingStart RX options Manually stopping receiving Wrong Speed or IOC and ImageWrong speed 60 chosen instead Wrong speed 120 chosen instead Setting timer receiving schedule Timer ReceivingTimer setup screen Timer schedule list Station options Example N Pacific W Part Timer schedule menu IOC options Channel options Example station JMHDrum speed options Start time entry window Start timer options End time entry windowSave window Turning on/off specific timer programs Clearing all timer programsClear all options Facsimile image Displaying Facsimile Images Example of phase mismatching Phase mismatchPhase entry window Processing Facsimile Images Example of phasing signal out of synchronization Phasing signal out of synchronizationNoise rejection Sync entry window Image format Image colorColor options Reverse image options Zooming images Erasing Facsimile ImagesRotating images Erase image options Preventing Erasure of Facsimile Images Adding Facsimile Channels FAX-30 top 2. Press the Edit WX FAX Station soft keyEdit facsimile station menu Station options Example stations of northwest pacific Frequency, call sign and station name entry windows FAX Operation PC Channel setup menuStarting receiving Stopping receiving Timer program list Setting, changing timer receiving schedule Timer program menu Timer Program No.2 Turning on/off specific timer programs Top Facsimile standby display Phase Sync options Example of phasing signal out of synchronizatio Color Saving images Lock options Lock Edit station list menu Edit Station List This page intentionally left blank About Navtex Messages Navtex Operation NavnetMessage categories Receiving navtex messages RX setup menu Setting Up Navtex Stations, Messages, AlarmsNavtex message data display Navtex frequency options Navtex station mode options Navtex station optionsNavtex message options Max error rate entry window Alarm SAR MSG optionsAlarm warning msg options Previewing Incoming Navtex Messages Navtex message selection screenNavtex message preview display Displaying Navtex Messages Displaying navtex messagesSample navtex message Remarks on navtex messages Displaying the Navtex Station List Nav areas for 490 kHz navtex stationsKHz stations of nav area Edit station menu Adding Navtex StationsEdit navtex station menu Nav area selection window Station name entry window Station ID1 entry windowLatitude entry window Navtex Operation PC RX Setup Setting Up Navtex Stations, Messages Received messages click to display Navtex standby display Navtex station list 490kHz Station List Edit station list Cullercoats Editing Navtex Stations Deleting Navtex Stations This page intentionally left blank Maintenance MAINTENANCE, TroubleshootingMaintenance points Check Point Action Troubleshooting Replacement of FuseTroubleshooting Trouble Problem Remedy Diagnostics NavNet System setup menuFAX-30 menu Diagnostic test results Diagnostics PC Clearing Data NavNet Clear memory menuClear all images options Clear memory options Clearing Data PC FAX-30, cover opened All Clear for technicians only Simulation Mode Accessing the simulation mode through NavNetSimulation setup menu SIMULATION§ Setup WX FAX §SIMULATION Live Navtex Simulation Accessing the simulation mode through PC This page intentionally left blank Installation Mounting dimensions of facsimile receiver FAX-30Facsimile Receiver Antenna wiring and preamp status Wire antenna or whip antennaAntenna Unit General antenna connection How to mount the preamp unit FAX-5 Installation of preamp unit FAX-5 option Wiring Wiring Ground wire Power cableWire or whip antenna Attachment of antenna connector Supplying Power to the Preamp Unit JIS cable specificationsFAX-30, top view, cover removed Browser settings Browser, PC SettingsInternet Explorer Version Netscape Navigator Version PC settings FAX-30IP address Facsimile Stations AppendixFacsimile station map AP-1 Zone AP-2 Facsimile station list alphabetical order AP-3 Navtex stations map Navtex StationsAP-4 Location of navtex stations AP-5 Navtex stations list AP-6 VII AP-7 XII AP-8 NavNet menu tree Menu TreeAP-9 Soft keys Menu key AP-10 PC Menu tree AP-11Facsimile menu tree Navtex menu tree AP-12 Specifications of Facsimile Receiver This page is intentionally left blank ＰａｃｋｉｎｇＬｉｓｔ FAX-30-J/E-AP FAX-30-J/E-N Page Page Page Page Page IN-1 Index Index IN-2