Furuno FAX-408 manual Sleep Timer, Activating the sleep timer, Unlocking the keyboard

1. OPERATION

1.10Sleep Timer

The sleep timer feature sleeps the set after reception has passed. Fax signal will not be received when the sleep timer is active.

1.10.1Activating the sleep timer

1.Press the PRG key.

2.Press the 3 key to show the sleep mode setting mode.

SLEEP MODE : OFF 1-OFF 2-ON

3.Press the 1 key to disable the sleep timer or the 2 key to enable it.

4.If the 1 key was pressed at step 3, press the E key to turn off the sleep mode. If the 2 key was pressed, the display shown below appears. Go to step 5.

SLEEP TIME:

SET SLEEP TIME

5.Using the numeric keys, set the amount of time (within 23h59m) to sleep the set. To sleep the set 30 minutes later, for example, enter [0], [0], [3], [0].

6.Press the E key.

The TIMER LED (orange) lights. IN SLEEP!! is displayed when the sleep function becomes active.

1.10.2Unlocking the keyboard

All keys except the PRG key are locked when the sleep timer function is in standby (before spec- ified time passes). To unlock the keyboard in this case, do the following:

1. Press the PRG key to show the following menu.

KEY LOCK : OFF?

PUSH E KEY

2. Press the E key to unlock the keyboard and enable all operations.

1.10.3Disabling the sleep timer

To disable the sleep timer, do the following:

1. Press the PRG key to show the following menu.

SLEEP MODE : OFF

PUSH E KEY

2. Press the E key.

10