Furuno FR-8111, FR-8251 manual Menu Overview, Basic menu operation, 5 MAIN menu, 6 TRAIL menu

1.5 Menu Overview

The MAIN menu, composed of nine menus, con- tains functions which normally do not require fre- quent adjustment in everyday operation.

Basic menu operation

1)Press the MENU key to display the MAIN menu.

2)Operate the VRM or EBL control to select a menu with the cursor and press the ENTER/ SELECT key. (You can also select menus by pressing key or control shown on the MAIN menu. In this case you need not press the EN- TER/SELECT key.)

For example, select the TRAIL menu.

TRAIL

Sel Item by VRM & hit ENT.

MAIN

Sel Item by VRM & hit ENT.

TIME CONT

MODE

	15S
Cursor	30S

1M

3M

6M

Options of menu selected

TRAIL ECHO TRAIL

GUARD GUARD ALARM

MARK&		TIME	AUDIO
DATA	MARK	ALM	OFF
FUNC3	FUNCTION	BRILL

TRUE

TONE MULT

15M

30M CONT

appear here.

PLOT PLOT SYMBOL

ECHO	INITIAL
SIG	A/C AUTO

Current setting

You can select a menu by using the cur- sor or (in most cases) pressing appropriate key on the control panel. To select the PLOT menu, for example, select PLOT and press the ENTER/SELECT key or press the PLOT SYMBOL key.

Cursor circumscribes current selection.

Figure 1-5 MAIN menu

Figure 1-6 TRAIL menu

3)Select option (in far right-hand column) by operating the VRM or EBL control.

4)Press the ENTER/SELECT key to register se- lection.

5)Press the MENU key to close the menu.

Changing pages on the INITIAL menu

The initial menu has two pages: INITIAL1 and INITIAL2. You can switch between them as fol- lows:

Previous page: Place the cursor on [−] and press the ENTER/SELECT key.

Next page: Place the cursor on [↓] and press the ENTER/SELECT key.

1 – 7