11 - 4 IMAGETEAM™ 2020/4620 System Manual

To communicate with an IT2020-5B, Visual Menu 2003 requires that the PC have
at least one available serial communication port and an RS-232 cable to connect
the port to the device. A power supply, which plugs into the IT2020-5B, is also
required.

Note: The IT2020-5B/IT4620 system works only with Visual Menu 2003 version

4.2 or later.

Visual Menu 2003 Operations
The Visual Menu 2003 program performs the following operations:
•Displays all configuration data, and saves the information to a file on your
PC.
•Configures the device to meet your specific requirements. Visual Menu
2003 has all the programming parameters that are available via
programming bar codes in this User’s Guide.
•Creates and prints a clone bar code which contains the program and
configuration data from one device. This bar code can then be used to
program additional devices with the same parameters.
•Selects a device from a list, then performs offline or online file
configuration for that device.
Temporary Visual Menu 2003 Configuration
For quick download communication configuration, scan the Visual Menu 2003
bar code to temporarily configure the imager for Visual Menu 2003 settings.
Note:
If you have a unit capable of keyboard wedge mode, scan the bar code
below and the unit will communicate in RS-232 mode, allowing it to work
with Visual Menu 2003. To convert the imager back to keyboard wedge
communication, cycle the power.
Note:
If you download new software into a unit, the user-programmed
parameters are retained. If you need to discard user-programmed
settings, see Resetting the Standard Product Default Settings: Current
Application Work Groupon page 11-2.
Installing Visual Menu 2003 from the Web
1. Access the Hand Held Products web site at www.handheld.com.
Visual Menu 2003