Hand Held Products 2020, 4620 system manual Multiple Symbols, No Read

When the output sequence is Off, the bar code data is output to the host as the imager decodes it.

Note: This selection is unavailable when the Multiple Symbols Selection is turned on.

Required

On/Not Required

*Off

Multiple Symbols

When this programming selection is turned On, it allows you to read multiple symbols with a single pull of the imager’s trigger. If you press and hold the trigger, aiming the imager at a series of symbols, it reads unique symbols once, beeping (if turned on) for each read. The imager attempts to find and decode new symbols as long as the trigger is pulled. When this programming selection is turned Off, the imager will only read the symbol closest to the aiming beam.

On

* Off

No Read

With No Read turned On, the imager notifies you if a code cannot be read. If using a Quick*View Scan Data Window, an “NR” appears when a code cannot be read. If No Read is turned Off, the “NR” will not appear.

On

* Off

IMAGETEAM™ 2020/4620 System Manual 4 - 17