7 - 20 IMAGETEAM™ 2020/4620 System Manual

UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not.

Default = On

.
UPC-A Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it.

Default = On.

UPC-A Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-A data.
Default = Off for both 2 Digit and 5 Digit Addenda.
* On
Off
Off
* On
* 5 Digit Addenda Off
5 Digit Addenda On
* 2 Digit Addenda Off
2 Digit Addenda On