Hand Held Products 2020 Using the Imager with Bluetooth Devices, Changing Bluetooth PIN Code

Using the Imager with Bluetooth Devices

The IT4620 imager may be used either with the IT2020-5B base or with other Bluetooth devices. Scanning the Non-Base Bluetooth Connection bar code below allows the imager to be used with other Bluetooth devices (e.g., PDA, PC

-Bluetooth USB Adapter). After you scan the bar code below, follow the instructions supplied with your Bluetooth device to locate the imager and connect to it. If you go out of range with your imager, the imager automatically reconnects to the Bluetooth device. If you want to re-link to the IT2020-5B base, refer to "Single Imager Operation" on page 3-5 or "Multiple Imager Operation" on page 3-6.

Note: The multiple work groups option is not available when you are using the imager with Bluetooth devices other than the IT2020-5B base.

Non-Base BT Connection

Changing Bluetooth PIN Code

Some devices require a PIN code as part of the Bluetooth security features. Your imager’s default PIN is 1234, which you may need to enter the first time you connect to your PDA or PC. The PIN code must be between 1 and 16 characters. To change the PIN, scan the bar code below and then scan the appropriate numeric bar codes from the Programming Chart inside the back cover of this manual. Scan Save to save your selection.

Bluetooth PIN

IMAGETEAM™ 2020/4620 System Manual 3 - 11