Hand Held Products 4620, 2020 system manual Codabar Check Character

Codabar Check Character

Codabar check characters are created using different “modulos.” You can program the imager to read only Codabar bar codes with Modulo 16 check characters. Default = No Check Character.

No Check Character indicates that the imager reads and transmits bar code data with or without a check character.

When Check Character is set to Validate and Transmit, the imager will only read Codabar bar codes printed with a check character, and will transmit this character at the end of the scanned data.

When Check Character is set to Validate, but Don’t Transmit, the unit will only read Codabar bar codes printed with a check character, but will not transmit the check character with the scanned data.

* No Check Character

Validate Modulo 16, but

Don’t Transmit

Validate Modulo 16

and Transmit

7 - 4 IMAGETEAM™ 2020/4620 System Manual