SAFETY PRECAUTIONS

DO NOT attempt to charge incompatible types of rechargeable batteries. This charger is designed to only charge and discharge Nickel-Cadmium, Nickel-Metal Hydride, Lithium-Ion, Lithium-Polymer, LiFePO4 and Lead- Acid batteries.

Make sure you place the charger on a firm level surface for charging.

DO NOT attempt to charge batteries at excessive fast charge currents. Check with your battery manufacturer for the maximum charge rate applicable to your battery.

DO NOT use automotive type battery chargers to power the charger.

DO NOT leave the charger unattended while charging. Disconnect the battery and remove input power from charger immediately if the charger becomes hot. Allow the charger or battery to cool down before reconnecting.

DO NOT allow water, moisture or foreign objects into the charger.

DO NOT place the battery or charger on or near a flammable object while in use. Keep away from carpets, cluttered workbenches, etc.

DO NOT cover the air intake holes on the charger as this could cause the charger to overheat.

Connect the input leads to the 12V power source first, then connect the battery.

DO NOT disassemble the charger.

This unit is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use it safely.

Young children should be supervised to ensure that they do not play with the Typhoon L50B Pro.

DO NOT attempt to charge non-rechargeable batteries.

The battery must be placed in a well ventilated area (for charging lead- acid batteries)

After charging, disconnect the battery charger from the power supply first, then disconnect the battery.

2

Page 4
Image 4
Fusion L50B PRO operating instructions Safety Precautions