•If the other buttons are pressed, or nothing is pressed, the present battery type stops flashing.
•If the Battery TYPE button is pressed and briefly held, the recent & previous data will be shown until the Battery TYPE button is pressed.
•If the ENTER button is briefly pressed, a parameter which can be adjusted starts to flash and if the ENTER button is pressed again, the next parameter starts to flash. If nothing is pressed for 3 seconds, the parameter stops flashing.
•Once the ENTER button is pressed and briefly held, the charger starts to charge according to the selected parameters.
NiMH Mode
BATT TYPE | CHARGE | INC |
| NiMH |
| C=3.0A |
| DEC | volt = 0mV/cell |
| ENTER |
|
| ENTER |
INC | DEC |
NiMH CHARGE C=3
START
BATTERY CHECK
WAIT PLEASE....
CHG 0:00 00000 NC+3.00A 5.200V
INC | DEC |
NiMH 
NiMH CHARGE C=3
Setting Charge Current
Adjust the desired charge current, which ranges from 0.1A to 6.0A with the INC & DEC buttons. Press the ENTER button to confirm the setting.
NiMH 
Setting Delta Peak Sensitivity
Set the Delta Peak Sensitivity from 5mV to 25mV per cell with the INC & DEC buttons and press the ENTER button to confirm the setting.
7
