ENGLISH

IMPORTANT FOR LASER PRODUCTS

Precautions:

1.CLASS 1 LASER PRODUCT

2.CAUTION: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

3.CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all servicing to qualified service personnel.

4.CAUTION: This CD player uses invisible laser radiation, however, is equipped with safety switches to prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.

5.CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

About the demonstration mode (DEMO MODE)...

When shipped from the factory, “DEMO” is set to “DEMO ON” in this unit. The demonstration will start automatically if no sound comes in for 3 minutes. (See page 25.)

To deactivate the demonstration mode

1 Press and hold SEL for more than 2 seconds so that one of the PSM items appears on the display.

2 Press or to select “ DEMO.” 3 Press - to select “ DEMO OFF ”.

4 Press SEL (Select) to finish the setting.

CAUTION on Volume Setting

CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a CD and adjust it as required during playback.

2

How to reset your unit

Press the reset button on the front panel using a ball-point pen or similar tool.

Note:

Your preset adjustments such as preset channels or sound adjustments will be erased.

AUX

SEL EQLV

CD CHANGER CONTROL D

MODE

1 7

2 8

3 9

4 10

Page 2
Image 2
JVC KW-XC88 manual How to reset your unit, About the demonstration mode Demo Mode, To deactivate the demonstration mode