![](/images/new-backgrounds/1182107/18210749x1.webp)
Turning the demo mode on or off
- DEMO MODE
You can turn the demo mode on or off. When shipped from the factory, “DEMO ON” is selected.
• | DEMO OFF: | Turns the demo mode off. |
• | DEMO ON: | Turns the demo mode on. The |
|
| demonstration will start |
|
| automatically if no sound comes |
|
| in for 3 minutes. |
Note:
If the unit has been reset (and the power is on), demonstration will start if no sound comes in for about 15 seconds.
Assigning names to the sources
|
|
| ENGLISH | |
You can assign names to station frequencies and | ||||
|
| |||
the external component connected to the AUX |
|
| ||
input jack. |
|
|
| |
After assigning a name, it will appear on the |
|
| ||
|
| |||
display when you select the source. |
|
| ||
|
|
|
| |
Sources | Maximum number |
|
| |
| of the characters |
|
| |
Station frequencies* | Up to 10 characters |
|
| |
| (up to 32 station |
|
| |
| frequencies including |
|
| |
| both FM and AM) |
|
| |
|
|
|
| |
External components | Up to 10 characters |
|
| |
(“AUX INPUT” only) |
|
|
|
*You cannot assign name to a station frequency stored in the EX (extra) button.
1 Select a source you want to assign a name to.
When you select a source, the power automatically comes on.
Each time you press the button, the source changes as described on page 7.
2 Press and hold SEL (select) for more than 2 seconds while pressing DISP (display).
SEL EQLV
(at the same time)
CONTINUED TO THE NEXT PAGE
25