ENGLISH
Setting the clock display - CLOCK DISP
You can set the clock to be shown on the display when the unit is turned off.
When shipped from the factory, the clock is set not to be shown on the display.
•CLOCK OFF: Clock display is turned off.
•CLOCK ON : Clock display is turned on.
Note:
If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “CLOCK OFF” to save the car’s battery.
Selecting the dimmer mode - DIMMER
When you turn on the car headlights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
• DIM OFF: | Cancels Auto Dimmer. | |
• | DIM ON: | Always dims the display. |
• | DIM AUTO: Activates Auto Dimmer. | |
Note:
Auto Dimmer equipped for this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.
In this case, set the dimmer mode to “DIM ON” or “DIM OFF.”
Adjusting the display contrast level
- CONTRAST
You can adjust the display contrast level among 1 (dark) to 10 (bright). When shipped from the factory, the display contrast level is set at level 5.
Selecting the scroll mode - SCROLL
You can select the scroll mode for the disc information.
When shipped from the factory, Auto Scroll mode is set to “SCRL ONCE.”
•SCRL ONCE:Scrolls only once.
•SCRL AUTO: Repeats the scroll
•SCRL OFF: Cancels Auto Scroll.
Selecting the external component to use
- EXT INPUT
You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor
To use the external component as the playback source through this unit, you need to select which component - CD changer or external component - to use.
When shipped from the factory, CD changer is selected as the external component.
• CD CHANGER: To use the CD changer.
• LINE INPUT: | To use the external |
| component other than CD |
| changer. |
Notes:
•If the current source is CD changer or external component, this item does not appear.
•For connecting the Line Input Adaptor
Adjusting the auxiliary input level
- AUX ADJ
Adjust the auxiliary input level properly when an external component is connected to the auxiliary input jack.
When shipped from the factory, the auxiliary (AUX) input level is set at level 00.
If the input level of the connected component is not high enough, increase the input level properly. Without adjusting the line input level, you may be surprised at a loud sound when you change the source from the external component to another source.
24
