JVC KW-XC88 manual Storing stations in memory, Automatic preset SSM Manual preset

Storing stations in memory

You can use one of the following methods to store broadcasting stations in memory.

•Automatic preset: SSM (Strong-station Sequential Memory)

•Manual preset

•Storing your favorite station into the EX button

Automatic preset: SSM

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually.

EXAMPLE: Storing an FM station of 88.3 MHz into the preset channel number 1 of the FM1 band

1 Select the FM1 band.

ENGLISH

You can preset 6 local stations in each FM band (FM1, FM2, and FM3).

1 Select the band (FM1, FM2, or FM3).

FM1FM2FM3 AM

2 Press MODE repeatedly until“SSM” appears.

3 Press SEL.

SEL EQLV

2 Tune in to a station (in this example, of 88.3 MHz).

Press to tune in to stations of higher frequencies.

Press to tune in to stations of lower frequencies.

3 Press and hold the number button (in this example, 1) for more than 2 seconds.

1 7 2 8

		“P1” flashes for a few seconds.
“--SSM--” appears, then disappears when		4 Repeat the above procedure to store
automatic preset is over.
Local stations with the strongest signals are		other stations into other preset
		numbers.
searched and stored automatically in the band
you have selected (FM1, FM2, and FM3). These
stations are preset in the number buttons -	No.

1 (lowest frequency) to No. 6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned in.

9