OTHER MAIN FUNCTIONS

Setting the clock

Changing general settings (PSM)

ENGLISH

After installation, set the built-in clock correctly.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See

page 23.)

SEL LVEQ

2 If “CLOCK HOUR” does not appear,

press or repeatedly until it appears.

3 Adjust the hour.

4 Press or until “CLOCK MIN (minute)” appears on the display.

5 Adjust the minute.

6 Finish the setting.

SEL LVEQ

You can change the following settings for this unit by using the PSM (Preferred Setting Mode) control.

Basic Procedure

There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 23.)

SEL LVEQ

2 Select a PSM item you want to adjust. (See page 23.)

3 Adjust the PSM item selected.

4 Repeat steps 2 and 3 to adjust the other PSM items if necessary.

5 Finish the setting.

SEL LVEQ

To check the current clock time while the unit is turned off, press DISP (display).

The power turns on, the clock time is shown for 5 seconds, then the power turns off.

22

Page 22
Image 22
JVC KW-XC88 manual Other Main Functions, Setting the clock, Changing general settings PSM, Basic Procedure