Part # 4517125 (09/03) Page 15
Insert gap tool directly below platen adjusters.
CLEANING AND MAINTENANCE continued
6. A llow time for grill to heat and t urn ready. Press
both the Cancel (Green) and Standby (Black)
buttons simultaneously to lower the upper platen.
Press the Cancel (Green) button to raise the platen.
Now, press both the Cancel (Green) and (Black)
Buttons to re-lower the platen.
7. Remove platen adjuster caps from all four
adjustment points on each platen. Remove the four
locking caps from the adjustment points.
8. Using the adjusting tool lower platen until adjusting
tool touches the arm assembly.
9. With gapping tool, adjust right rear of platen until
the gapping tool fits snugly between the upper
platen and grill surface.
10. Move next to the left front adjuster and raise the
platen until the gapping tool fits snugly between
the upper platen and grill surface.
11. Next go to the left rear adjuster and raise the platen
until the gapping tool fits snugly between the upper
platen and grill surface.
12. Move next to the right front adjustment and raise
the platen until the gapping tool fits snugly between
the upper platen and grill surface.
13. Repeat steps 9-12 one or more times until gapping
tool fits snugly between the upper platen and
grill surfa ce at all four adjustment points without
further adjustment. (See diagram below.)
14. Replace the platen adjuster locking caps “hollow
side down” and tig hten snugly. Replace platen
adjuster caps.
15. Repeat steps 9-14 for each platen.