Part # 4517125 (09/03) Page 23
6. Use and to c hange the Instant on Time to
the desired value.
7. Press to save the cha nges.
8. Press to return to “PROGRAMMING MODE
MENU ITEMS”
9. Press a gain to exit.
To Change Control Ty pe:
1. Press and hold for three, (3) seconds. “ENTER
CODE” will be displayed.
2. Using the Gap Setting buttons,
enter the code, (1251). “ENTER CODE **** ” will
be displayed.
3. Press to enter the Progra mming Mode.
“PROGRAMMING MODE MENU ITEMS”
will be displayed.
4. Press two, (2) times. “PROGRAMMING
MODE SYSTEM SETUP” will be displayed.
5. Press eight, (8) times. “CONTROL TYPE
ELECTRIC (or GAS)” will be displayed. (type
varies by grill).
6. Use and to ch ange Control Type to match
the design of the grill.
7. Press to save the cha nges.
8. Press to return to “PROGRAMMING MODE
MENU ITEMS”
9. Press a gain to exit.
To Turn E xtended Time On/Off:
1. Press and hold for three, (3) seconds. “ENTER
CODE” will be displayed.
2. Using the Gap Setting buttons,
enter the code, (1251). “ENTER CODE **** ” will
be displayed.
3. Press to enter the Progra mming Mode.
“PROGRAMMING MODE MENU ITEMS”
will be displayed.
PROGRAMMING continued
4. Press two, (2) times. “PROGRAMMING
MODE SYSTEM SETUP” will be displayed.
5. Press nine, (9) times. “EXTENDED TIME
NO (or YES)” will be displayed.
6. Use a nd to turn Extended Time on or off.
7. Press to save the cha nges.
8. Press to return to “PROGRAMMING MODE
MENU ITEMS”
9. Press a gain to exit.
To Change the Grill Function:
1. Press and hold for three, (3) seconds. “ENTER
CODE” will be displayed.
2. Using the Gap Setting buttons,
enter the code, (1251). “ENTER CODE **** ” will
be displayed.
3. Press to enter the Progra mming Mode.
“PROGRAMMING MODE MENU ITEMS”
will be displayed.
4. Press two, (2) times. “PROGRAMMING
MODE SYSTEM SETUP” will be displayed.
5. Press ten, (10) times. “FU NCTION
CLAMSHELL (or FLAT)” will be displayed.
6. Use and to toggle between Flat mode and
Clamshell mode.
7. Press to save the cha nges.
8. Press to return to “PROGRAMMING MODE
MENU ITEMS”
9. Press a gain to exit.
To Change the Start Delay:
1. Press and hold for three, (3) seconds. “ENTER
CODE” will be displayed.
2. Using the Gap Setting buttons,
enter the code, (1251). “ENTER CODE **** ” will
be displayed.