SETUP MENU

The Setup Menu contains the unit settings that should not require frequent change. The Setup Menu is divided into eight tabs: Chart, Tools, Numbers, Alarms, System, Calibrations, Units, and Memory. Each tab will be described in more detail in this section.

To enter and exit the Setup Menu, press the SETUP button on the face of the unit. The first time that the SETUP button is pressed, the Setup Menu will be displayed with the ‘Chart’ tab highlighted in black. Pressing the UP or DOWN arrow will move the highlight between the tab selections. Press the RIGHT arrow to access the selection fields. Each time the Setup Menu is accessed, the unit will return to the last edited selection field. Press the LEFT arrow key to get back to the tabs.

Chart Tab

The ‘Chart’ tab allows the user to determine the appearance of the scrolling chart display. To access the ‘Chart’ tab, place the highlight over it using the arrow keys.

Frequency

The ‘Frequency’ setting allows you to choose a transducer frequency. Frequency refers to the “pitch” of the sound that the transducer sends and receives. You may choose ‘200kHz’ (default), ‘50kHz’ or ‘Dual’ frequency.

Continued on page 16

Unit Operation

Setup Menu: Chart Tab

Frequency Settings

15