Garmin 100 BLUE Memory Tab, Unit Operation, Setup Menu: Memory Tab, ENTER, Remember, Factory Setup, Software Version, Remember Selections, To select a Memory Setting:

Memory Tab

The ‘Mem’ tab contains the settings for unit memory and allows you to reset the unit to the factory settings and review the software version. To access the ‘Memory’ tab, use the arrow keys to highlight it.

Remember

The Fishfinder 100 Blue can be set to remember it’s settings each time you power it on. You can set it to remember the settings in the Setup Menu (‘Setup Only’) or the unit’s settings in both the Setup Menu and the Adjustment Bar (‘All’).

To select a Memory Setting:

1.Highlight the ‘Mem’ tab on the Setup Menu.

2.Highlight the ‘Remember’ field and press ENTER.

3.Choose ‘All’ or ‘Setup Only,’ then press ENTER to accept the selection.

Factory SetupTo restore the Factory Settings:

1.Highlight the ‘Mem’ tab on the Setup Menu.

2.Highlight the ‘Factory’ Setup button and press ENTER.

3.Choose ‘OK’ to reset the unit or ‘Cancel’ to abort.

Software Version

The ‘Software Version’ Button will report information about the current software version in the unit and display the Unit ID Number.

To activate the Software Version Window:

1.Highlight the ‘Mem’ tab on the Setup Menu.

2.Highlight the ‘Software Version’ button and press ENTER.

3.Press ENTER to close the information window.

Unit Operation

Setup Menu: Memory Tab

Remember Selections	Restore
	Factory Settings

Software Version Information 29