To change the Depth Number Setting:

1.Highlight the ‘Num’ tab on the Setup Menu.

2.Highlight the ‘Depth Number’ selection field and press ENTER.

3.Choose ’Auto’ or ‘From Chart,’ then press ENTER to accept the selection.

Alarm Tab

The ‘Alarm’ tab allows you to activate and configure the four alarms available in the Fishfinder 100 Blue. To access the ‘Alarm’ tab, place the highlight over it using the arrow keys. See page 37 for alarm icons and messages.

Fish Alarm

The ‘Fish Alarm’ can be configured to sound by fish size. There are four different alarm selections: ‘Off,’ ‘Small, Medium and Large,’ ‘Medium and Large,’ or ‘Large.’ The ‘Fish Alarm’ will sound with or without the ‘Fish Symbols’ activated on the Chart Tab of the Setup Menu.

To set a Fish Alarm:

1.Highlight the ‘Alarm’ tab on the Setup Menu.

2.Highlight the ‘Fish Alarm’ selection field and press ENTER.

3.Choose the desired setting, then press ENTER to accept the selection.

Unit Operation

Setup Menu: Numbers/Alarms Tabs

Fish Alarm Selections

23