Battery Volts

The ‘Battery Volts’ Alarm can be set to warn you when the battery reaches a critical state of discharge.

To activate/deactivate the Battery Volts Alarm:

1.Highlight the ‘Alarm’ tab on the Setup Menu.

2.Highlight the ‘Battery Volts’ checkbox.

3.Pressing ENTER will insert or remove a check mark in the checkbox.

To set the Battery Volts Alarm:

1.Highlight the ‘Battery Volts’ field and press ENTER.

2.Use the Arrow Keys to input the desired voltage, then press ENTER to accept the setting.

System Tab

The ‘Sys’ tab contains the ‘Contrast,’ ‘Beeper,’ ‘NMEA Output’ and ‘Language’ setups. To access the ‘Sys’ tab, use the arrow keys to highlight it.

Contrast

The display ‘Contrast’ may need to be adjusted to compensate for light levels or viewing angles.

To adjust the Contrast:

1.Highlight the ‘Sys’ tab on the Setup Menu.

2.Highlight the ‘Contrast’ Adjustment field and press ENTER.

3.Using the Arrow Keys, move the slider right to darken the screen or left to lighten the screen. When finished, press ENTER to accept the setting.

Unit Operation

Setup Menu: Alarms/System Tabs

Battery Volts AlarmContrast Adjustment Slider

25