Tools Tab

The ‘Tools’ tab contains the ‘Flasher,’ ‘Simulator’ and ‘Noise Reject’ tools. The ‘Noise Reject’ and ‘Flasher’ tools are used to enhance the chart and help in identifying and providing information about an underwater return. The ‘Simulator’ tool is used to enhance the simulator mode by allowing you to customize the simulated transducer selection. To access the ‘Tools’ tab, place the highlight over it using the arrow keys.

Flasher

With the ‘Flasher’ tool active, a graphic Flasher representation will be displayed on the far right side of the chart. This graphic Flasher displays structure and bottom returns much the same as a true Flasher. You may find this feature particularly useful when using ‘Fish Symbols.’

To Turn the Graphic Flasher on and off:

1.Highlight the ‘Tools’ tab on the Setup Menu.

2.Highlight the ‘Flasher’ selection field and press ENTER.

3.Select ‘On’ or ‘Off’ and press ENTER to accept the selection.

Simulator

The ‘Simulator’ tool allows you to select a simulated transducer type for use with the Fishfinder 100 Blue’s built-in display simulator. These choices allow the simulator to more accurately depict actual operation of the unit.

For details on using the simulator, see page 35.

Noise Reject

The ‘Noise Reject’ tool helps filter unwanted noise from the chart. The ‘Noise Reject’ tool can be turned ‘Off,’ set for ‘Auto’ (automatic) adjustment or set for ‘Manual’ adjustment.

Continued on page 20

Unit Operation

Setup Menu: Tools Tab

Graphic Flasher Activated

Remember when setting the Noise Reject tool, the higher the noise rejection setting, the more likely the unit is to not show fish or structure.

19