Simulator Mode

The Fishfinder 100 Blue comes with a built-in simulator. While in simulator mode, the unit will display a random bottom scene, and the Fishfinder 100 Blue can be controlled just as if it were on the water. Using simulator mode allows the user to practice and learn the operation of the unit at home rather than on the water.

If the Fishfinder 100 Blue is turned on without a transducer connected, the unit will start in simulator mode. Also the unit can be switched into simulator mode by selecting one of the simulated transducer options from the ‘Simulator Selection’ field as described below. The unit will indicate that it is running in simulator mode by displaying a message across the bottom of the screen. The message will be replaced by the “S” simulator mode icon in the lower left corner of the screen.

The unit can be configured to act as if a variety of transducers are installed while in the simulator mode.

To select a specific Transducer:

1.Press the SETUP button on the face of the unit.

2.Using the Arrow keys, highlight the ‘Tools’ tab then the ‘Simulator’ selection field.

3.Press ENTER. Choose the desired transducer from the list.

4.Press ENTER to accept the transducer selection.

On the Water

Simulator ModeSimulator Message and IconSimulator Transducer Selections

35