Garmin 70 Pairing Sensors, Pairing Additional, Accessories, RUN, SPORT, GENERAL, 2.Press MODE > SETTINGS, BIKE > HEART RATE, FOOT POD, or BIKE SENSOR > ON

Getting Started

Pairing Sensors

The ANT+™ Heart Rate Monitor sensor included with your watch is already paired. Press MODE until training mode appears.

The icon appears on the FR70 screen when the sensor is paired.

If you purchased a sensor (with ANT+ wireless technology) separately, you need to pair it with your FR70.

After you pair the first time, your FR70 automatically recognizes your sensor each time it is activated. This process occurs automatically when you turn on the FR70 and only takes a few seconds when the sensors are activated and functioning correctly. When paired, your FR70 only receives data from your sensor, and you can go near other sensors.

Pairing Additional

Accessories

1.Move away (10 m) from other sensors while the FR70 is trying to pair with your sensor for the first time. Bring your sensor within range (3 m) of the FR70.

2.Press MODE > SETTINGS >

SPORT.

3.Select RUN, GENERAL, or

BIKE > HEART RATE, FOOT POD, or BIKE SENSOR > ON.

Note: When pairing the foot pod, make sure RUN is selected.

4. While the FR70 scans for new sensors, the , , and icons blink. The icons are solid when paired.

tip: The accessory needs to send data to complete the pairing process. You need to wear the heart rate monitor, take a few steps wearing the foot pod, or pedal your bike with the GSC 10.

8 FR70 Owner’s Manual