1.Connect one side of the strap to the heart rate monitor module.

2.Wet both electrodes on the back of the heart rate monitor strap to create a strong connection between your chest and the transmitter.

Electrodes

Electrodes

3.Wrap the strap around your chest, and connect the other side.

note: The Garmin logo should be right-side up.

4.Bring the FR70 within range (3 m) of the accessory. Press MODE until the training page appears.

Getting Started

TIP: If the heart rate data is erratic or does not appear, you may have to tighten the strap on your chest or warm up for 5-10 minutes.

Using the Foot Pod (Optional)

The foot pod is on standby and ready to send data as soon as you install it or start moving.

tip: Before pairing, walk 4-5 steps with the foot pod so it will begin transmitting speed data to your watch.

Installing the Foot Pod on Your Shoe Laces

1.Press the tab on the lace clip. Lift and separate the foot pod from the lace clip.

2.Loosen your shoe laces.

FR70 Owner’s Manual

11