Garmin EVA-2082S/126 user manual Designing an EVA Array cont’, of the wire gauge AWG and length

3.0 Designing an EVA Array (cont’)

The Cable Loss tab allows the user to enter the combined impedance of an EVA array and the length and gauge (AWG) of the wire feeding it, in order to calculate the level lost (dB) in the cable feeding the array. See Figure 7.

Figure 7:

EVADATM Cable Loss tab, calculates the dB level lost in speaker wiring as a function

of the wire gauge (AWG) and length

The Notes tab is a place to enter comments on the particular design.

The Supported Products tab shows both the EVA main array products but also Electro-Voice subwoof- ers which are suitable for use with EVA arrays. These vary in maximum acoustic output ability and low- frequency cut-off frequency. The Electro-Voice Web site (www.electrovoice.com) has detailed information on the subwoofers listed.

Electro-Voice® EVA Series User Manual 13