Miller Electric and DS-74DX16 Introduction, Installation, Specifications, Type of Input, Weight

SECTION 3 − INTRODUCTION

3-1. Specifications

Type of Input	Welding Power	Wire Feed Speed	Wire Diameter	Welding Circuit	Weight
Power	Source Type	Range	Range	Rating
		Standard: 50 To 780 ipm	.023 To 1/8 in (0.6	100 Volts,	12 ft (3.7 m):
24 Volts AC	Constant Voltage (CV)	(1.3 To 19.8 mpm)
Single-Phase			To 3.2 mm)	750 Amperes, 100%	207 lb (94 kg)
	DC With 14-Pin And
10 Amperes		Optional High Speed: 92		Duty Cycle
	Contactor Control		Max Spool Weight:		16 ft (4.9 m):
50/60 Hertz		To 1435 ipm
			60 lb (27 kg)		280 lb (127 kg)
		(2.3 To 36.5 mpm)

	12 ft (3.7 m) Boom (DS-12)	16 ft (4.9 m) Boom (DS-16)
Maximum Height With 4 ft (1.2 m) Post	17 ft (5.2 m)	21 ft (6.4 m)
Vertical Lift Of Boom	Horizontal to 60° Above Horizontal	Horizontal to 60° Above Horizontal

SECTION 4 − INSTALLATION

4-1. Installing Swivel Into Pipe Post

5

4

23

1

! Do not remove Safety Collar until instructed to.

1Swingpak Base or CBC Cart

2Pipe Post With Base

3Steel Bolt

Secure as shown using as a mini- mum 1/2 in diameter SAE grade 5 steel bolts.

4 Swivel Assembly

Insert into pipe post. Lubricate swivel.

5 Safety Collar

Tools Needed: 3/4 in

152 268-B

OM-1500-14 Page 11