MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
important to erase the log periodically or use syslog capability to download the logs to a
syslog server. The event log window contains 22 log entry lines.
Magnum6K25# show log
S DATE TIME Log Description
-- -------- -------- ------------------------------------------------------------
I 03-02-2005 5:14:43 P.M SYSMGR:System Subnet Mask changed
I 01-01-2001 12:00:00 A.M SYSMGR:successfully registered with DB Manager
I 01-01-2001 12:00:00 A.M SYSMGR:successfully read from DB
A 01-01-2001 12:00:00 A.M VLAN:Vlan type set to Port VLAN
I 01-01-2001 12:00:00 A.M SYSMGR:system was reset by user using CLI command
I 01-01-2001 12:00:00 A.M SNTP:Date/Time set to 01-01-2001 12:00AM
I 01-01-2001 12:00:00 A.M SNTP:Client started
I 03-03-2005 4:32:48 A.M SNTP:Date and Time updated from SNTP server
I 03-03-2005 9:31:59 A.M TELNET:Telnet Session Started
I 03-03-2005 9:32:04 A.M CLI:manager console login
A 03-03-2005 9:32:11 A.M IGMP:IGMP Snooping is enabled
A 03-03-2005 9:35:40 A.M IGMP:IGMP Snooping is disabled
A 03-03-2005 9:41:46 A.M IGMP:IGMP Snooping is enabled
Magnum6K25#
FIGURE 137 – Event log shown on the screen
Event logs can be exported to a ftp or a TFTP server on the network for further analysis or for
other uses. To facilitate the export of the event log, the CLI command is exportlog as shown
below
Syntax exportlog mode=<serial|tftp|ftp> [<ipaddress>] [file=<name>]
[doctype=<raw|html>] – facilitates the export of the event log information as a
text file or as an HTML file
Where
mode=<serial|tftp|ftp> - is the mode of transfer
<ipaddress> - is the IP address of the ftp or TFTP server
file=<name> - is the file name – please make sure the proper file extension is used e.g
html for an html file
doctype=<raw|html> - indicates the log is saved as a text file (raw) or as an HTML file
249