Replacing a processor
This server is compatible with Intel® Pentium 4® or Celeron® processors. The server automatically detects the processors each time you turn on the server. Whenever you install a new processor, you should first install the most current version of the BIOS. For instructions, see “Updating the BIOS” on page 59.
Warning Processors and heat sinks may be hot if the computer has been running. Before replacing a processor or heat sink, allow them to cool for several minutes.
Caution A heat sink must be installed on the processor. Installing a processor without a heat sink could damage the processor.
To replace a processor:
1 Install the most current BIOS version. For instructions, see “Updating the BIOS” on page 59.
2
3
4
5 Press down on the heat sink locking lever on each side, push them slightly away from the heat sink, then lift the levers out of the way.
www.gateway.com | 45 |