Connect the power and data cables.
Lock the system board into place with the thumbscrew.
13
14 Install the memory, processor, and heat sink, then reconnect the heat sink cooling fan to the system board.
15
16 Install the expansion cards. For more information, see “Installing a PCI expansion card” on page 43.
17
18
19 Press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens.
20 Check BIOS settings to make sure that they detect the server’s new hardware, then save your changes (if any) and close the BIOS Setup utility.
21 If your server does not start after installing the new system board, contact Technical Support. For more information, see “Getting Help” on page 6.
www.gateway.com | 53 |