Get, Set, Store, Load, Exit, Write, Ping, Ftp | Gateway AG-168V

AG-168V SIP GATEWAY User Manual (V1.42)

get	Display basic parameters of the AG-168V IP GATEWAY
set	Set parameters of the AG-168V IP GATEWAY
store	Save current settings to designated position
load	Load designated settings to current position
exit	Exit from the setting mode without saving the configuration
write	Exit with saving all configurations and restart AG-168V
ping	Ping other net parameter
ftp	The GATEWAY connects to FTP server and then get the files

Detail description of AG-168V Telnet commands

Command ?

Syntax description: No optional parameter

Usage: Type command name and parameters following P:\> . Be used as the

keyword to supply keyword and parameters of the relevant commands.

Relevant usage: None

Detailed description:

List help of all commands

For example:

	P:\>?
	set
	get	list settings
	store x	store current to xth settings
	load x	load xth settings to current
	exit
	write	save settings

Command get

21

Image 21

Gateway Get, Set, Store, Load, Exit, Write, Ping, Ftp, Detail description of AG-168V Telnet commands Command ?

Contents

Function Keys of AG-168V SIP Gateway Introduction Features Software Hardware Operating requirements Standard and ProtocolElectric requirements Gateway supports following standard and protocol Size Installation Phone Keypad setup Configuration Configured by WEB Is192.169.1.100 Network SettingPage Protocol Setting Page Register port phone number set local ID Phone settings Page inner line prefix default is Audio settings G729g7231g711ug711a and gsm Other settings Phonenumber check phonenumber auto upgrade Button to confirm the modification Configured by PalmTool Telnet Configuration AG-168V Telnet Commands ExplanationComman Command get Detail description of AG-168V Telnet commands Command ?Get Set Innerline 1enable Localprefix Detailed description Set iptype Command set Syntax description set keywords value Set ppppin Set pppidSet ip Set subnetmask Set service type Set serviceSet router Set dns Set serviceid Set serviceaddrSet nattraversal Set nataddr Set natttl Set signalportSet GATEWAYnumber Set account Set rtptos Set registerttlSet rtpport Set jittersize Set dialplan Set dtmf payloadSet dialnumber Set dddcode Set dddprefix Set iddprefixSet innerline Set localpreifx Set digitmap Set fwdpoweroffSet fwdnumber Set fwdalways Set vad Set 6.3kSet agc Set aec Set superpassword Set passwordSet codec2 Set codec3 Command store Set upgradeaddrRelevant Usage store Command load Relevant Usage load Command exit Command ping Syntax description ping IP address Ftp command Syntax description ftp valueRelevant usage ftp Call with ip address Usage of AG-168V FXS Call when Pstn first Dual mode enabled Telnet command to updating Upgrade AG-168V IP GatewayUsing Http Prepare Updated program through FTP HardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved