Gateway user manual Usage of AG-168V FXS,
Call with ip address

AG-168V SIP GATEWAY User Manual (V1.42)

Note All the Telnet commands of AG-168V IP GATEWAY should be written in low case and the password is case sensitive.

￿The usage of AG-168V FXS

￿Receving calls

No matter what calls from IP or PSTN , the phone connecting to AG-168V FXS port will ring . Mention you that there is call. You can pick up the handset or the speaker of the normal phone.

￿Call when Dual mode disabled

Call with phone number:

1 Dial with handset: pickup the handset, dial after dial tone

2 Dial with speaker: press speaker, dial after dial tone

3.Redial: press redial and call the last number

Call with ip address:

If not registered in gatekeeper and gateway disabled, dial with the ip address:

1.pickup the handset, call after dial tone, press # after numbers

2.Press speaker, input ip address after dial tone, press # after numbers

Notice: Dial with ip address, using * for — .

Call with GATEWAY

If registered in Gatekeeper dial the number.

Pick up the handset or Press speaker, dial the number after the dial tone

36