parameter is "disable", "all", "mac", "pppid", "account", "phonenumber". When select
as "disable" the terminal will NOT do the auto upgrade when select as "all" then the
terminal will do the upgrade as item 2 when select as other value it will add more check based on item 2’s rule. The detail rules are:
Mac | PA168S_citron_h323_ 000945000000 _135.bin |
| |
|
|
|
|
Pppid | PA168S_citron_h323_ pppid_135.bin |
|
|
|
|
| |
Account | PA168S_citron_h323_ account_135.bin |
| |
|
|
| |
Phonenumb | PA168S_citron_h323_phonenumber_135.bin |
| |
er |
|
|
|
|
|
|
|
Theredcharacteristhecontentfortheterminalt | ocheck.The configuration | ||
settings and digit map file have same rules. By this way, we could upgrade a special terminal by FTP.
When upgrade the configuration file, if you select upgradetype as “all”, then the terminal will keep the network settings, account, pin, servicetype without changing; but if you select other upgradetype, then the terminal will only keep network settings and the parameter related with upgradetype without changing. Other settings will all be rewrite as the configuration file. For example, if you select upgradetype as “account”, then the terminal will keep network settings and account without changing. All other settings, like phone number, pin, service type, will changed as the configuration file.
4. Customers must begin with firmware version 1.34 or later. First set the “upgrade addr” field as the FTP service address(domain name or ip address are all OK) , and ensure that the “servicetype” is same as the service provider requested. After the phone is rebooted, it will connect to the FTP server automatically. It will then check the filenames for type and version. If it finds the matching file with a later version than that which is installed then it will perform an upgrade. If all three files have a new version, the phone will upgrade in the following order: phone setting first, then digit map after rebooting, and then firmware binary after rebooting again. If the server version is not newer than current version in the phone, no upgrade is performed. This guarantees that customers have the latest firmware installed at all times..
Since it may take about ten minutes to upgrade some kinds of firmware binaries, we need customers to verify that they want to upgrade at this time. The phone will display “Sure to Upgrade” on the LCD to prompt customers before it does the upgrade.The customers can use the “Handfree” key to confirm it.
For the service provider, this system gives the flexibility to decide whether the latest version contains changes worth supporting. For example if the current firmware is 1.34
40
