Set DTMF relay type. X is ranged form 0 through 3: 0:control string 1:inband
audio 2: signal keypad 3:rfc 2833.
set dtmf payload X
When dtmf X select 3(rfc 2833).This parameter can be used indicating type of RTP payload type. The value can be use integer
set dialplan X
Enable/disable dial plan and dial number. Parameter X ranged from 0
through 4: 0: disable dial plan; 1: enable dial plan; 2: use dial number; 3: use
179XX service.;4: use hotline function.
set dialnumber XX
When set dialplan value set as 2, please use this command to set dial
number. For example, with eTalk card used, please set it as 00. When set
dialplan value set as 4, please use this command to set hotline number.
set dddcode XX
Set the area code when set dialplan value set as 1 or 2. For example, the
area code of Beijing is 10; the area code of Shanghai is 21, and the area
code of Chengdu is 28, etc. Parameter xxx must be an Arabic numeral and
no longer than 3 characters.
set iddcode XXX
Set the country code when set dialplan value set as 1 or 2. For example, the
country code of China is 86; the country code of USA is 1, etc. Parameter
xxxx must be an Arabic numeral and no longer than 4 characters.
29
