Fig 3.1 Http Setting
Network Setting
Fig 3.2 Network Setting
iptype: Set how IP GATEWAY gets relevant network parameters by selecting
corresponding item from drop down list.
static ip: Select this item to authorize users set IP address, subnet mask and
router IP address of IP GATEWAY manually.
dhcp: Select this item to enable DHCP mode. With this system, your LAN or router
automatically assigns all the required network parameters to any device connected
to it when the device log on.
with DHCP on. So, if you’re LAN or router is configured to use DHCP addressing,
the IP GATEWAY’s LAN parameters will automatically be configured as soon as it is
connected to the LAN or router and powered up.Default IP address of the
is192.169.1.100.
pppoe Those ADSL and Cable Modem users please select this item for it is a
protocol especially designed for them. With this system, ADSL ISP automatically
assigns all the required IP parameters to any device connected to it when the
device log on.
modem If the IP GATEWAY used with modem, please select this item to get
8
