Gateway AG-168V user manual Set natttl, Set GATEWAYnumber, Set account, Set pin, Set registerport

AG-168V SIP GATEWAY User Manual (V1.42)

www.ipchicken.com;www.showmyip.com;www.whatismyip.com; www.myipaddress.com; www.whatismyipaddress.com; ip.sbbs.net; www.whatismyipaddress.net;checkip.dyndns.org

set natttl XX

Set NAT TTL XX is an integer between 10 and 65535 sec. default value is 20

sec.

set GATEWAYnumber XXXXXXXX

Set a GATEWAY number of AG-168V IP GATEWAY . Value xxxxx must be

an Arabic numeral and no longer than 16 characters.

set account XXXXXX

While calling card is set, set account of chosen card; while local type is set

use authentication type, set user ID; while set localtype is set as 1, set SIP

ID.

set pin XXXXXXXXXX

While calling card is set, set password of chosen card; while local type is set

authentication type, set password.

set registerport XXXX

Set register port. XXXX is range from 1024 through 6553.

set signalport XXXX

This port is Q.931 port using TCP protocol. XXXX is range from 1024 through

65535.

set controlport XXXX

This port is H.245 port using TCP protocol. XXXX is range from 1024 through 65535.

27