Chapter 2: Unit Installation
Also Continue Using Default Install IP Address - Leaving this option enabled will allow the Gateway Series appliance to listen for network requests on its factory default IP address.
Note: For security purposes, it is recommended that this feature be disabled after initial IP configuration is complete. After this feature is disabled, the Gateway Series appliance will be accessible only from the IP address that is assigned by the DHCP server or statically configured.
–Factory Default IP Address - Displays the factory default IP address assigned to the Gateway Series appliance. This address is accessible only on the first physical interface for untagged traffic.
Default Install Mask - Displays the factory default network mask of the Gateway Series appliance.
DNS Addresses - Specify up to 3 DNS servers to be used by the Gate way Series appliance. A DNS server may also be referred to as a nam eserver.
IP for SSL Certificate - Take the IP address for SSL certificate used to secure the admin interface from a specified Interface #.
The Gateway Series appliance is capable of loading its configuration from a configuration server on reboot. This allows Gateway Series appliances to be quickly and easily deployed at multiple locations with minimal interaction from an administrator.
In order to generate a configuration to place on a configuration server, configure a Gateway Series appliance, generate a backup from the web
Digium, Inc. | Page 41 |