![](/images/new-backgrounds/1147222/14722225x1.webp)
GBC 4064WF-1
FEATURES/ACCESORIES GUIDE
Refer to the following pages for detailed information on the
Features
FIGURE A
1. Emergency Stop Buttons: (FIGURE A, Item 1)
Four
To Engage
To disengage turn the push button clockwise when the emergency condition has been resolved.
FIGURE B
1. Heated Main Top Roller: (FIGURE B, Item 1)
Silicone rubber coated steel tube heat the laminating film and compress the heated film to the items being laminated. Heat is provided by an internal heating element.
2.Heated Main Bottom Roller: (FIGURE B, Item 2) Silicone rubber coated steel tube heat the laminating film and compress the heated film to the items being laminated. Heat is provided by an internal heating element.
3.Media Pressure Plate: (FIGURE B, Item 3)
The Pressure Plate mounted to the front of the table helps hold down the image as it enters the Nip Area. To remove, move Spring Pin, and remove Pressure Plate.
FIGURE C
1. Front Table: (FIGURE C, Item 1)
The Front Table aids the operator when aligning media. The Front Table is stationary but pivots down for easy access to the film. To pivot the table down, lift up on the Media idler (FIGURE C, Item
2)and pull the table towards you. The table can now pivot down. Note: The machine is limited to 3ft/min while either table is in the down position.
Operation Manual
2 Table Idler: (FIGURE C, Item 2)
The Table Idler assists feeding of images into the web. It is helpful in roll to roll operation and helps move large rigid panels through the nip.
FIGURE D
1. Safety Light Beam System: (FIGURE D, Item 1)
The
FIGURE E
1. Rewinder Tubes: (FIGURE E, Item 1)
Used to rewind release liners or finished Medias.
2. Upper Tension Idler Bar: (FIGURE E, Item 2)
The Upper Tension Idler Guides the upper lamination onto the Top Main Roller insuring a constant amount of wrap on the Top Main Roller.
FIGURE F
1. Rewinder Clutch Adjustment: (FIGURE F, Item 1)
The
2. Nip Pressure: (FIGURE F, Item 2)
The
3. Pneumatic Adjustment Knob: (FIGURE F, Item 3)
© 2009 GBC an ACCO Brands Co. | Page 13 |