GBC 4064WF-1

Operation Manual

PRE-INSTALLATION

Before a 4064WF-1 Laminator can be installed, ensure the following requirements are met:

1. Are doorways and hallways wide enough for the laminator to be moved to the installation site?

2. Is there ample room for the laminator?

• A work area must be established that allows for operation in both the front and rear of the laminator and provides space for efficient material flow.

3. Is the environment appropriate for the laminator?

• The laminator requires a clean, dust and vapor free environment to operate properly.

• Avoid locating the laminator near sources of heat or cold. Avoid locating the laminator in the direct path of forced, heated or cooled air.

CAUTION: Air flow can cause uneven heating / cooling of the rollers and result in poor output quality.

4. Have you contacted a certified electrician to wire the receptacle and ensure that adequate power is being supplied, having the appropriate capacity, over current protection and safety lockouts available?

GBC 4064WF-1 Requires:

• 220V at 60Hz with 40 amps single phase.

• Nema 6-50 P 50 A 250 V Receptacle

This Machine is supplied with a Nema 6-50 male plug.

INSTALLATION

1.Shipping damage should be brought to the immediate attention of the delivering carrier.

2.With assistance, carefully roll the laminator into position over flat and even surfaces.

3.The laminator should be positioned to allow exiting film to flow freely to the floor or a work table. Accumulation of laminate immediately behind the laminator as it exits the equipment may cause the film to wrap around the pull rollers, resulting in a “jammed” condition.

4.Avoid locating the laminator near sources of heat or cold. Avoid locating the laminator in the direct path of forced, heated or cooled air.

5.Once the laminator has been properly positioned, lock the castors in place. Locking the castors prevent the machine from rolling during set up, operation or servicing.

6.Connect the attachment plug provided with the laminator to a suitably grounded outlet. Avoid connecting other equipment to the same branch circuit to which the laminator is connected, as this may result in nuisance tripping of circuit breakers or blowing fuses.

Note: Machine must be leveled to ensure best performance. Level the machine by lowering both the main and pull rolls. Lay a level on top of the main and pull rolls. Then, check level from main roll to pull roll on right and left side of the roll. Finally, check by placing the level diagonally across lower main to lower pull rolls.

© 2009 GBC an ACCO Brands Co.

Page 6

Page 5 Page 7
Page 6
Image 6
GBC operation manual Pre-Installation, GBC 4064WF-1 Requires
Page 5 Page 7

4064WF-1 specifications

The GBC 4064WF-1 is an advanced, high-performance wide format printer designed to meet the specific needs of industrial and commercial printing environments. Engineered for versatility and efficiency, this printer is ideal for producing a variety of print applications, including posters, banners, and other large-format graphics.

One of the most notable features of the GBC 4064WF-1 is its impressive print resolution. With a maximum resolution of up to 1200 x 1200 dpi, this printer ensures sharp, vibrant images that capture attention. The incorporation of advanced inkjet technology allows for a broader color gamut and more detailed reproductions. This precision is particularly advantageous for businesses requiring high-quality output for marketing materials or fine art reproductions.

The GBC 4064WF-1 supports various media types, including vinyl, paper, and canvas, offering users the flexibility to explore different substrates. Its roll-to-roll capability makes it convenient for continuous printing tasks without the need for constant media changes. The printer’s feed system is designed for enhanced media handling, reducing the risk of jams and ensuring consistent print quality throughout long runs.

Additionally, the GBC 4064WF-1 integrates seamlessly with existing workflows, thanks to its compatibility with industry-standard software and color profiles. This feature enables users to maintain color accuracy and consistency across multiple print jobs. The printer also incorporates advanced RIP software, providing fine control over print settings and media management.

Another key characteristic is its user-friendly interface. The touchscreen control panel allows operators to navigate settings easily, monitor print jobs in real-time, and perform maintenance tasks effortlessly. This intuitive design minimizes downtime, helping businesses maintain productivity.

Energy efficiency is also a crucial aspect of the GBC 4064WF-1. With its eco-friendly technologies, this printer reduces power consumption during operation, making it a sustainable choice for environmentally-conscious businesses.

In summary, the GBC 4064WF-1 stands out with its exceptional print quality, versatile media handling, comprehensive software compatibility, user-friendly operation, and energy efficiency. These features make it an ideal choice for businesses looking to enhance their printing capabilities and deliver high-quality results consistently.
Top Page Image Contents