Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information
Preparing to install the refrigerator.
Read these instructions completely and carefully.
Leveling Rollers
The rollers have 2 purposes:
| The rollers can be adjusted so the refrigerator is firmly positioned on the |
1 | |
| floor and does not rock back and forth. |
| Rollers allow you to move the refrigerator away from the wall for cleaning. |
2 |
To adjust the rollers, remove the base grille by pulling it out at the bottom.
Turn the front roller adjusting screws clockwise to raise the refrigerator, counterclockwise to lower it. Use a 3/8″ socket wrench, adjustable wrench or pliers.
Turn the rear roller adjusting screws clockwise to raise the refrigerator, counterclockwise to lower it. Use a flat blade screwdriver.
NOTE: When leveling, you can improve door closure by raising the front as much as 5/8″ (15 mm) more than the rear of the refrigerator.
| Rear Roller |
|
| Adjusting Screw |
|
Front Roller | Slot where prong of grille |
|
Adjusting Screw | snaps into place | |
To replace the base grille, align prongs on back of grille with clamps in cabinet and push forward until grille snaps into place.
20
