www.GEAppliances.com

ADAPTER PLUGS

Usage situations where appliance’s power cord will be disconnected infrequently.

Because of potential safety

 

hazards under certain conditions,

(Adapter plugs not

we strongly recommend against the

permitted in Canada)

Safety Instructions

use of an adapter plug. However, if you still elect to use an adapter, where local codes permit, a TEMPORARY CONNECTION may be made to a properly grounded two-prong wall receptacle by the use of a UL listed adapter which is available at most local hardware stores.

Align large prongs/slots

TEMPORARY METHOD

Ensure proper ground and firm connection before use.

Operating Instructions

The larger slot in the adapter must be aligned with the larger slot in the wall receptacle to provide proper polarity in the connection of the power cord.

CAUTION: Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall receptacle is grounded through the house wiring.

You should have the circuit checked by a qualified electrician to make sure the receptacle is properly grounded.

When disconnecting the power cord from the adapter, always hold the adapter with one hand. If this is not done, the adapter ground terminal is very likely to break with repeated use. Should this happen, DO NOT USE the appliance until a proper ground has again been established.

Usage situations where appliance’s power cord will be disconnected frequently.

Do not use an adapter plug in these situations because frequent disconnection of the power cord places undue strain on the adapter and leads to eventual failure of the adapter ground terminal. You should have the two-prong wall receptacle replaced with a three-prong (grounding) receptacle by a qualified electrician before using the appliance.

Troubleshooting Tips

Consumer Support

9

Page 9
Image 9
GE 164D3370P211 owner manual Adapter Plugs, Operating Instructions