Installation Instructions
2REVERSING THE DOOR SWING (CONT.)
5REVERSING THE DOOR HANDLES (CONT.)
5.4 Transfer Freezer Door Handle
5.4.1 | Remove the screw | OP |
| holding the handle | Top |
|
| |
| to the top of the |
|
| door and the two |
|
| screws holding the |
|
| KDQGOHWRWKHERWWRP |
|
| of the door. |
|
5.4.2 | Remove the handle. |
|
Bottom
5.4.3Remove the screw from the right top edge of the door
and insert it into the handle screw hole on the left side.
5.4.4Transfer the door stop as shown in preceding section 5.2.
5.4.5 Attach the handle to the right edge of the door with
VFUHZVDWWRSDQGERWWRP
XVLQJERWWRPKROHVYDFDWHG
E\UHPRYDORIWKHGRRUVWRS screws.
6RE-HANGING THE DOORS
6.1 Re-hang the fresh food door
6.1.1/RZHUWKHIUHVKIRRGGRRURQWRWKHERWWRP hinge pin. Be sure the washer is in place on
the pin.
Plastic
Washer
Hinge |
Bracket |
6RE-HANGING THE DOORS (CONT.)
6.1.2Insert the pin on the center hinge into the socket in the top of the door. Place the spacer, then the washer, on
the hinge pin.
NOTE: The center hinge must
EHWXUQHGRYHUDVVKRZQZKHQ mounted on the left side.
Plastic Washer
and Spacer
6.1.3 7LOWWKHGRRUWRZDUGWKHFDELQHW$VWKHGRRULVEURXJKW |
into position, slide the hinge under the head of the screw |
ZKLFKHDUOLHUKDGEHHQSDUWO\GULYHQLQWRWKHRXWHUPRVW |
KROH,QVHUWWKHUHPDLQLQJVFUHZWKHQWLJKWHQERWK |
screws securely. |
6.2
6.2.1 Lower the freezer door onto the center hinge pin. Be sure the washer and spacer are in place on the pin.
Plastic Washer
and Spacer
6.2.2 7LOWWKHGRRUWRZDUGWKHFDELQHWOLIWLQJWKHWRSKLQJHVR WKHSLQ¿WVLQWRWKHVRFNHWRQWKHWRSRIWKHGRRU
6.2.3. 0DNHVXUHWKHGRRULVVOLJKWO\DERYHWKHWRSRIWKH
FDELQHWDQGWKHJDSEHWZHHQWKHGRRUVLVHYHQ across the front. Tighten the top hinge screws. Do not overtighten these
16