GE 2-9774 manual Desktop Installation

DESKTOP INSTALLATION

25

4

1 T/P switch

NOTE: For desktop charging, the handset is able to charge facing up or facing down.

6

3

1.Set the TONE/PULSE switch to TONE for touch-tone service, or PULSE for pulse (rotary) service. If you don’t know which type of service you have, check with the phone company.

2.Set the RINGER switch to ON so the handset rings for incoming calls.

3.Plug the power supply cord into the base and into an AC outlet.

4.Raise the base antenna.

5.Place handset in the base. Allow the phone to charge for 12 hours before using the first time. The CHARGE/IN USE light comes on indicat- ing that the battery is charging. If you don’t charge the handset battery properly (for 12 hours) when you first set up the phone, performance of the battery will be compromised.

6.After charging, connect the telephone line cord to the phone and then to the wall jack.

NOTE: Use only the Thomson power supply # 5-2429 that is compatible with this unit. Using other adapters may damage the unit.

6