DESKTOP SYSTEM INSTALLATION
3 | 1 |
|
2
1.Connect the handset cord into the handset and into the jack on the left side of the base unit.
2.Plug one end of the telephone line cord into the jack marked PHONE LINE on the back of the unit and plug the other end into a modular wall jack.
3.Plug the smaller end of the power supply cord into the POWER jack on the back of the answerer; plug the larger end into an AC power outlet.
4.Set the TONE/PULSE switch (on the right side of the unit) to TONE if you have
NOTE: Only use the Thomson power supply that came with this unit
3
