GE 21 Replacing the light bulbs, Instructions Installation Instructions Troubleshooting, Safety

Models: 21 200D2600P001

1 104
Download 104 pages 16.24 Kb
Page 15
Image 15
Replacing the light bulbs.

Replacing the light bulbs.

www.GEAppliances.com

Setting either or both controls to 0 does not remove power to the light circuit.

Safety

Refrigerator Compartment—Upper Light

1 Unplug the refrigerator.

2 The bulbs are located at the top of the

Tabscompartment, inside the light shield. On some models, a screw at the front of the light shield will have to be removed.

3 To remove the light shield, press in on the tabs on the sides of the shield and slide forward and out.

4

5

After replacing the bulb with an appliance bulb of the same or lower wattage, replace the light shield and screws (on some models). When replacing the light shield, make sure that the tabs at the back of the shield fit into the slots at the back of the light shield housing.

Plug the refrigerator back in.

Instructions Operating

Refrigerator Compartment—Lower Light
This light is located above the top drawer.

1 Unplug the refrigerator.

2 Remove the convertible meat drawer control knob by pulling straight out.

3 Lift the light shield up and pull it out.

4

5

After replacing the bulb with an appliance bulb of the same or lower wattage, replace the shield and the knob.

Plug the refrigerator back in.

Freezer Compartment

1 Unplug the refrigerator.

2 Remove the shelf just above the light shield. (The shelf will be easier to remove if it is emptied first.) On some models, a screw at the top of the light shield will need to be removed.

3 To remove the light shield, press in on the sides, and lift up and out.

4

5

Replace the bulb with an appliance bulb of the same or lower wattage, and reinstall the light shield. When reinstalling the light shield, make sure the top tabs snap securely into place. Replace the screw (on some models).

Reinstall the shelf and plug the refrigerator back in.

Instructions Installation Instructions Troubleshooting

Dispenser

1 Unplug the refrigerator.

2 The bulb is located on the dispenser under the control panel.

Remove the light bulb by turning it counterclockwise.

3

4

Replace the bulb with a bulb of the same size and wattage.

Plug the refrigerator back in.

Tips Consumer Support

15

Page 15
Image 15
GE 21 Replacing the light bulbs, Instructions Installation Instructions Troubleshooting, Instructions Operating, Dispenser