Installing the water line.

Read these instructions completely and carefully.

Connect the Tubing to the Refrigerator

Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.

The illustration below will look like the connection on your refrigerator.

Installation Instructions Operating Instructions Safety Instructions

If your refrigerator does not have a water filter, we recommend installing one if your water supply has sand or particles that could clog the screen of the refrigerator’s water valve. Install it in the water line near the refrigerator.

1 Remove access cover.

2 Remove the plastic flexible cap from the water valve (refrigerator connection).

3 Place the compression nut and ferrule (sleeve) onto the end of the tubing as shown.

4 Insert the end of the copper tubing into the water valve refrigerator connection as far as possible. While holding the tubing, tighten the fitting.

5 Fasten the copper tubing into the clamp provided to hold it in position. You may need to pry open the clamp.

6 Replace access cover.

 

1/4″ Copper

Tubing

Tubing

 

Clamp

 

1/4″ Compression Nut

Ferrule (sleeve)

Refrigerator

Connection

Remove Cover

Consumer Support Troubleshooting Tips

Turn the Water On at the Shutoff Valve

 

 

Tighten any connections that leak.

 

Replace the access cover and screws (on some

1

2

 

 

 

 

models).

 

 

 

Plug In the Refrigerator

 

 

Arrange the coil of copper tubing so that it does not

Push the refrigerator back to the wall.

vibrate against the back of the refrigerator or against

 

 

the wall.

 

 

 

 

 

Start the Icemaker

 

 

Set the icemaker power switch to the ON position.

NOTE: In lower water pressure conditions, the

The icemaker will not begin to operate until it

water valve may turn on up to 3 times to make

reaches its operating temperature of 15°F (-9°C) or

sure enough water reaches the icemaker.

below. It will then begin operation automatically if

 

 

the icemaker power switch is in the ON position.

 

 

26

Page 25 Page 27
Page 26
Image 26
GE 200D2600P001 Connect the Tubing to the Refrigerator, Turn the Water On at the Shutoff Valve, Plug In the Refrigerator
Page 25 Page 27

21, 200D2600P001 specifications

The GE 200D2600P001 is a high-performance digital control system designed specifically for industrial applications. This robust system offers advanced features and technologies that enhance operational efficiency and reliability for various processes, making it a preferred choice for many industries, including oil and gas, power generation, and manufacturing.

One of the main features of the GE 200D2600P001 is its modular architecture, which allows for easy scalability and customization. Users can configure the system according to their specific needs, whether they require a simple setup for smaller applications or a complex configuration for large-scale operations. This flexibility makes it suitable for a wide range of projects and processes.

Another significant characteristic of the GE 200D2600P001 is its user-friendly interface. The system comes equipped with an intuitive graphical user interface (GUI) that simplifies monitoring and control tasks. Operators can easily navigate through different function modules, visualize process data, and access real-time reports, which enhances decision-making and optimizes workflow.

In terms of technology, the GE 200D2600P001 integrates cutting-edge communication protocols. It supports various industry-standard protocols, including Modbus, Ethernet/IP, and HART, ensuring seamless integration with other systems and devices. This interoperability facilitates data exchange and enhances the overall performance of industrial processes.

Additionally, the GE 200D2600P001 features advanced diagnostic tools that help to ensure maintenance and reduce downtime. The system is equipped with built-in self-monitoring capabilities that allow it to detect anomalies and alert operators to potential issues before they escalate into significant problems. This proactive approach to maintenance leads to increased equipment availability and longevity.

Moreover, the system is designed with security in mind, incorporating multiple layers of protection against cyber threats. This commitment to cybersecurity ensures that sensitive data remains secure and operational integrity is maintained.

Overall, the GE 200D2600P001 stands out for its modularity, user-friendly interface, advanced communication capabilities, and robust diagnostic tools. These characteristics make it an exceptional choice for industries seeking to optimize their control systems and enhance productivity while ensuring safety and security. With its reliable performance and adaptability, the GE 200D2600P001 represents a valuable investment for any industrial operation.
Top Page Image Contents