Shut Off the Main Water Supply

Turn on the nearest faucet long enough to clear the line of water.

Safety Instructions

Install the Shutoff Valve

 

Install the shutoff valve on the nearest frequently

1

 

used drinking water line.

2 Choose a location for the valve that is easily accessible. It is best to connect into the side of a vertical water pipe. When it is necessary to connect into a horizontal water pipe, make the connection to the top or side, rather than at the bottom, to avoid drawing off any sediment from the water pipe.

5 Tighten the clamp screws until the sealing washer begins to swell.

Do not overtighten or you may crush the copper tubing.

Washer

Pipe Clamp

Inlet End

 

 

Operating

3

Drill a 1/4″ hole in the water pipe, using a sharp

Saddle-Type

Vertical Cold Water Pipe

4

bit. Remove any burrs resulting from drilling the hole in the pipe.

Fasten the shutoff valve to the cold water pipe with the pipe clamp.

Shutoff Valve

NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves are illegal and use is not permitted in Massachusetts. Consult with your licensed plumber.

Route the Copper Tubing and Connect It to the Shutoff Valve

Route the copper tubing between the cold water line and the refrigerator.

Make sure the tubing is fully inserted into the valve. Tighten the compression nut securely.

Route the tubing through a hole drilled in the wall or floor (behind the refrigerator or adjacent base cabinet) as close to the wall as possible.

Be sure there is sufficient extra tubing [about 8 (244 cm) coiled into 3 turns of about 10

(25 cm) diameter] to allow the refrigerator to move out from the wall after installation.

Place the compression nut and ferrule (sleeve)

Saddle-Type Shutoff Valve

Packing Nut

Outlet Valve

Compression Nut

Ferrule (sleeve)

Instructions Installation Instructions Troubleshooting

onto the end of the tubing and connect it to the shutoff valve.

NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves are illegal and use is not permitted in Massachusetts. Consult with your licensed plumber.

Turn On the Water and Flush Out the Tubing

1

Turn the main water supply on and flush out the

2

Shut the water off at the water valve after

tubing until the water is clear.

about one quart (1 l) of water has been flushed

through the tubing.

25

Tips Consumer Support

Page 25
Image 25
GE 21, 200D2600P001 installation instructions Shut Off the Main Water Supply, Operating, Tips Consumer Support

21, 200D2600P001 specifications

The GE 200D2600P001 is a high-performance digital control system designed specifically for industrial applications. This robust system offers advanced features and technologies that enhance operational efficiency and reliability for various processes, making it a preferred choice for many industries, including oil and gas, power generation, and manufacturing.

One of the main features of the GE 200D2600P001 is its modular architecture, which allows for easy scalability and customization. Users can configure the system according to their specific needs, whether they require a simple setup for smaller applications or a complex configuration for large-scale operations. This flexibility makes it suitable for a wide range of projects and processes.

Another significant characteristic of the GE 200D2600P001 is its user-friendly interface. The system comes equipped with an intuitive graphical user interface (GUI) that simplifies monitoring and control tasks. Operators can easily navigate through different function modules, visualize process data, and access real-time reports, which enhances decision-making and optimizes workflow.

In terms of technology, the GE 200D2600P001 integrates cutting-edge communication protocols. It supports various industry-standard protocols, including Modbus, Ethernet/IP, and HART, ensuring seamless integration with other systems and devices. This interoperability facilitates data exchange and enhances the overall performance of industrial processes.

Additionally, the GE 200D2600P001 features advanced diagnostic tools that help to ensure maintenance and reduce downtime. The system is equipped with built-in self-monitoring capabilities that allow it to detect anomalies and alert operators to potential issues before they escalate into significant problems. This proactive approach to maintenance leads to increased equipment availability and longevity.

Moreover, the system is designed with security in mind, incorporating multiple layers of protection against cyber threats. This commitment to cybersecurity ensures that sensitive data remains secure and operational integrity is maintained.

Overall, the GE 200D2600P001 stands out for its modularity, user-friendly interface, advanced communication capabilities, and robust diagnostic tools. These characteristics make it an exceptional choice for industries seeking to optimize their control systems and enhance productivity while ensuring safety and security. With its reliable performance and adaptability, the GE 200D2600P001 represents a valuable investment for any industrial operation.