The refrigerator doors may feel different than the ones you are used to. The special door opening/closing featuremakes sure the doors close all the way and are securely sealed.
When opening and closing the door,you willnotice a stop position. If the door is opened past this stop point, the door will remainopen to allow you to load and unloadfood more easily. When the door is only partially open, it will automatically close.
The resistance you feel at the stop position will be reduced as the door is loaded with food.
When the door is only partially open, it will automatically close.
Beyond this stop the door will stay open.
Operating Instructions Safety Instructions
Installation | Instructions |
Consumer Support Troubleshooting Tips
Toremovethe base grille,open the doors, removethe screw at each end of the base grilleand then pull the grillestraightout.
If doors are uneven,adjust the refrigerator door.
Using a 7/16″ socket wrench, turn the door adjusting screw to the right to raisethe door; to the left, to lower it. (A nylon plug, imbedded in the threads of the pin, prevents the pin from turning unless a wrench is used.)
7/16″ SocketWrench
Raise
After one or two turns of the wrench, open and close the refrigerator door and check the alignment at the top of the doors.
8