Installation Instructions

MOVING THE REFRIGERATOR (CONT.)
4DISCONNECT THE POWER COUPLING (on some models)

If the refrigerator has a water dispenser, there is a power line (harness) from the cabinet into the bottom hinge on the freezer door that must be disconnected.

To disconnect, pull apart at the coupling.

Bottom freezer hinge

5DISCONNECT THE ELECTRICAL CONNECTORS (on some models)

If the refrigerator has a refreshment center, there are electrical connectors (harnesses) from the cabinet into the bottom hinge on the refrigerator door that must be disconnected.

To disconnect, pull apart each connector.

Bottom refrigerator hinge

6CLOSE THE FREEZER AND REFRIGERATOR DOORS7REMOVE THE FREEZER DOOR

ARemove the freezer door top hinge cover by either squeezing it and pulling it up or by prying it off with a plastic putty knife.

BRemove the two 5/16hex head screws, then

lift the hinge straight up to free the hinge pin.

5/16Hex Head

COpen the freezer door to 90.°

90°

18